发动机机油滤清器虑层强度分析及优化

针对机油滤清器工作工况下进出口压差、机油滤层强度及导流桩高度等问题, 通过试验测试与仿真相结合, 对滤清器初步设计进行了评估及优化, 以确保滤清器在工作工况下进出口压降及滤层强度能满足要求. 首先进行滤层性能试验, 得到滤层的惯性阻力系数和黏性阻力系数; 再通过滤层多孔介质CFD分析, 对滤清器进出口压降进行分析计算. 结果表明: 在-18℃、25℃和70℃的工况下, 进出口压降都小于10kPa, 满足相关要求. 针对滤层的最大主应力超过其抗拉强度的问题, 通过CAE仿真分析, 优化滤层与导流桩间隙, 将滤层最大主应力由110.1MPa降至36.99MPa, 小于其抗拉强度42.8MPa.     

射频等离子制备石墨烯负载Co3O4催化剂及其析氧性能研究

氢能的引入能有效提升配电网的供电可靠性,而电解水制氢是实现低碳转型的关键技术,开发高效的电解水催化剂势在必行。过渡金属氧化物储量大、催化活性高,是具有广阔应用前景的析氧反应催化剂。本文通过射频等离子体处理制备石墨烯上负载Co₃O₄析氧催化剂,XRD、Raman和XPS测试结果显示,二维结构石墨烯的引入加速表面电子迁移,增大了反应面积。等离子体处理促进了纳米粒子在石墨烯上的负载,利用等离子体刻蚀作用在催化剂表面制造出大量碳结构缺陷和氧空位结构,改善了活性位点分布,有效调控Co₃O₄电子结构,提高析氧催化活性。电化学测试表明,本文中合成的Co₃O₄@rGO在电流密度为50 mA·cm^-2时的过电位为410 mV,动力学反应速率较快,表现出优于商业IrO₂的析氧催化活性。     

A microfluidics-dispensing-printing strategy for Janus photonic crystal microspheres towards smart patterned displays

From the implementation point of view, the printable magnetic Janus colloidal photonic crystals (CPCs) microspheres are highly desirable. Herein, we developed a dispensing-printing strategy for magnetic Janus CPCs display via a microfluidics-automatic printing system. Monodisperse core/shell colloidal particles and magnetic Fe₃O₄ nanoparticles precursor serve as inks. Based on the equilibrium of three-phase interfacial tensions, Janus structure is successfully formed, followed by UV irradiation and self-assembly of colloid particle to generate magnetic Janus CPCs microspheres. Notably, this method shows distinct superiority with highly uniform Janus CPCs structure, where the TMPTA/Fe₃O₄ hemisphere is in the bottom side while CPCs hemisphere is in the top side. Thus, by using Janus CPCs microspheres with two different structural colors as pixel points, a pattern with red flower and green leaf is achieved. Moreover, 1D linear Janus CPCs pattern encapsulated by hydrogel is also fabricated. Both the color and the shape can be changed under the traction of magnets, showing great potentials in flexible smart displays. We believe this work not only offers a new feasible pathway to construct magnetic Janus CPCs patterns by a dispensing-printable fashion, but also provides new opportunities for flexible and smart displays.     

Polymeric Carbon Nitride-based Single Atom Photocatalysts for CO2 Reduction to C1 Products

Photocatalytic CO₂ reduction to C₁ fuels is considered to be an important way for alleviating increasingly serious energy crisis and environmental pollution. Due to the environment-friendly, simple preparation, easy formation of highly-stable metal-nitrogen(M-N_x) coordination bonds, and suitable band structure, polymeric carbon nitride-based single-atom catalysts(C₃N₄-based SACs) are expected to become a potential for CO₂ reduction under visible-light irradiation. In this review, we summarize the recent advancement on C₃N₄-based SACs for photocatalytic CO₂ reduction to C₁ products, including the reaction mechanism for photocatalytic CO₂ reduction to C₁ products, the structure and synthesis methods of C₃N₄-based SACs and their applications toward photocatalytic CO₂ reduction reaction(CO₂RR) for C₁ production. The current challenges and future opportunities of C₃N₄-based SACs for photoreduction of CO₂ are also discussed.     

Quantum Watermark Algorithm Based on Maximum Pixel Difference and Tent Map

International Journal of Theoretical Physics - A new quantum watermark algorithm is presented by combining maximum pixel difference partitioning with the least significant bit substitution...     

A Lower Bound Sequence for the Minimum Eigenvalue of Hadamard Product of an M-Matrix and its Inverse

Czechoslovak Mathematical Journal - We propose a lower bound sequence for the minimum eigenvalue of Hadamard product of an M-matrix and its inverse, in terms of an S-type eigenvalues inclusion set...     

Hopf–Hopf bifurcation analysis based on resonance and non-resonance in a simplified railway wheelset model

Nonlinear Dynamics - This paper mainly investigates the dynamics of the non-resonant and near-resonant Hopf–Hopf bifurcations caused by the interaction of the lateral and yaw motion in a...     

In situ confinement of iron-based active sites within high porosity carbon frameworks with enhanced activity for rechargeable Zn–air battery

Non-noble bifunctional electrocatalysts with robust activity and stability toward oxygen evolution reaction (OER) and oxygen reduction reaction (ORR) are greatly significant but challenging for Zn-air batteries. Here, in situ confinement of FeN_x active sites in high porosity carbon framework (FeN_x/CMCC) derived from chelate of carboxymethylcellulose (CMC) and iron ions were synthesized. Particularly, construction of FeN_x within porous carbon framework accelerates the electron transfer and the sufficient utilization of active centers, and then expedites the reaction kinetics of ORR and OER. As expected, the optimized FeN_x/CMCC exhibits superior ORR activity with a larger half-wave potential of 0.869 V. The rechargeable Zn-air battery delivers a higher power density of 99.6 mW/cm² and a special capacity of 781.9 mA h/g_Zn at 10 mA/cm², together with excellent durability of over 335 h. Remarkably, the as-assembled solid-state battery exhibits a higher open circuit voltage (OCV) of 1.5 V, a special capacity of 709.7 mA h/g_Zn, as well as prolonged cycling stability (90 h). Moreover, the flexible solid-state battery displays negligible loss of electrochemical performance under various bending angles, illustrating its potential application in flexible electronic devices.     

Hybrid control strategy of delayed neural networks and its application to sampled-data systems: an impulsive-based bilateral looped-functional approach

Nonlinear Dynamics - In this work, the problem of hybrid control strategy for delayed neural networks is investigated via an impulsive-based bilateral looped-functional (IBBLF) approach. Firstly, a...     

Flatness,plateau limit and limit length of single-plateau functions

In this paper we consider iteration of single-plateau functions, an important class of continuous functions with infinitely many forts, and investigate changes of number and length of plateaux under iteration.We use the indices flatness, plateau limit and limit length to formulate those changes. Furthermore, we compute the flatness, plateau limit and limit length for all the nine types of single-plateau functions.